![]() Rotate VOLUME/ VOX SENS to adjust the VOX sensitivity. Adjust VOLUME/VOX SENS to set the sound level at which recording begins. This records only when there is sound to save power and prevent blank sections of tape. If the microphone has a remote control plug, connect it to the REM jack.Īudio source – Connect the audio source to the AUX jack using a mono patch cord (not included) and set the audio source’s volume to the desired level. If the playback sounds distorted, clean the recorder with a cassette deck cleaning kit (not included).īuilt-in microphone – Place the recorder within 2 to 3 feet of the sound source and set VOX to OFF.Įxternal microphone – Insert the microphone plug into the MIC jack. The tape will automatically stop when it reaches the end, or you can press STOP/EJECT. Load the cassette with the side to play facing out, and press PLAY. Using an adapter that does not meet these specifications could damage the recorder or adapter. Its center tip must be set to positive and its plug must fit the DC 6V jack. Note: The power source must supply 6V DC and deliver at least 300mA. You can power the recorder from your vehicle’s cigarette- lighter socket using a 6V, 300mA DC adapter and a size B Adapta-plug™ adapter (neither included available at your local Plug the power cord into the AC IN jack before plugging it into the AC outlet, and unplug the power cord from the AC outlet before unplugging it from the AC IN jack. ![]() Do not force the connections, as they only fit one way. Open the battery compartment and install four C batteries (not included) matching the polarity symbols (+/-).Ĭonnect the supplied power cord to the AC IN jack on the side of the recorder and connect the other end to a standard AC outlet. You can power the recorder in one of three ways.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |